2.2KW Air Cooled Spindle Kit

2.2kW Air cooled spindle kit for CNC Machines. This kit includes the spindle, aluminum mounting bracket, VFD, and 4 additional collets (3mm, 4mm, 6mm & 8mm).  The only thing you will need to run the spindle is the cable between the spindle and the VFD as well as the power cable to the VFD.

R11,499.94 Incl VAT

SKU SPK2.2A Category
Share with Friends

2.2KW Air Cooled Spindle Kit for CNC Machines

The perfect 2.2KW Air-cooled Spindle Kit for CNC machines. This kit includes the spindle, aluminum mounting bracket, VFD, and 4 additional collets (3mm, 4mm, 6mm & 8mm).  The only thing you will need to run the spindle is the cable between the spindle and the VFD as well as the power cable to the VFD. The perfect 2.2KW Air-cooled Spindle Kit for CNC machines.

2.2kW Air-cooled Spindle for CNC machine.  This is a 3-phase spindle designed to work with a 2.2kW Variable Frequency Drive (VFD).  It has a built-in ER20 Collet holder which can mount from 1mm to 13mm cutting bit shaft sizes.  The spindle is mounted to the gantry of the CNC machine with an aluminum bracket.  The rotor of the spindle is mounted with 2 bearings at the bottom of the spindle and 2 bearings at the top, to ensure long service life.  This spindle is perfect for milling and engraving of wood, plastic, foam, aluminum, brass, steel, and even stone.  

2.2KW Air Cooled Spindle Kit

Specification:

  • Diameter: 80mm
  • Power: 2.2KW
  • Current: 10A
  • Voltage: 220V
  • Frequency: 0-400Hz
  • Speed: 10-24000rpm
  • Collet Size: ER20
  • Cooling: Air Cooled
  • Runout: 0.003mm – 0.005mm
  • Bearings: C7002 x 2, C7005 x 2
  • Collet size in spindle: 1/8′ (3.175mm)
  • Additional collet sizes: 3mm, 4mm, 6mm & 8mm

 

2.2kW Variable Frequency Drive (VFD) to drive a CNC machine spindle.  This drive can be controlled via hand or via a controller board.  There is a wide range of settings to fine-tune the way the spindle is controlled and also comes with a manual with more details of each setting.  The VFD runs off single phase 220V AC and the output is also 220V provided to the spindle.  It also comes with self-controlled built-in cooling which switches on when required.

VFD Specification:
  • Power: 2.2KW
  • Input Voltage: 220V AC (Single Phase)
  • Output Voltage: 220V
  • Output Current: 10A
  • Input Frequency:50-60Hz
  • Output Frequency:0-400Hz
  • Input Phase: Single phase
  • Output phase: 3 phase
  • Size: 170 x 125 x 163mm
  • Control: By hand via built-in control panel or via digital signal from Pokeys57CNC controller board.