PoKeys57E – Ethernet CNC Controller

PoKeys57E is an easy-to-use Ethernet device that combines a lot of inputs and outputs and does not require complex programming knowledge. Pokeys57 provides 55 digital I/O (5V tolerant), 7 analog inputs (12-bit). All the I/O are controlled by the provided software which allows either to use of the graphical user interface or advanced console type interface. The settings can be stored on the device, so no special software is needed on the target system. PoKeys57 can be used as industrial or CNC control or data acquisition board. PoKeys is available with (PoKeys57ET) or without (PoKeys57EN) screw terminals.

R2,550.77 Incl VAT

SKU PoKeys57E Category
Share with Friends

PoKeys57E – Ethernet CNC Controller

PoKeys57E Ethernet CNC controller is an easy-to-use Ethernet device that combines a lot of inputs and outputs and does not require complex programming knowledge.

Pokeys57E provides 55 digital I/O (5V tolerant), 7 analog inputs (12-bit). All the I/O are controlled by the provided software which allows either to use of the graphical user interface or advanced console type interface. The settings can be stored on the device, so no special software is needed on the target system. PoKeys57E Ethernet CNC controller can be used as industrial or CNC control or data acquisition board. PoKeys is available with (PoKeys57ET) or without (PoKeys57EN) screw terminals.

Features:

  • Ethernet 10/100 with DHCP client or fixed IP support
  • TCP connection with the device
  • 55 digital inputs with pull-up resistors
  • 55 software-controlled digital outputs
  • 7 analog inputs (12-bit) with adjustable low-pass filtering support
  • Up to 26 encoder pair inputs (3 high-speed encoder inputs, 1 ultra-high-speed encoder input)
  • 3-axis 25 kHz or 8-axis 125 kHz Pulse engine
  • Digital counters on specific digital input pins
  • Up to 16×8 matrix keyboard
  • Two 8×8 matrix LED display support
  • Up to 6 high-speed fully configurable PWM outputs support (25 MHz PWM timer)
  • HD44780-based character LCD support (up to 4×20 characters)
  • PoExtBus support for adding up to 10 external shift registers = 80 additional outputs
  • PoNET devises support (48-key CNC keyboard, etc…)
  • Modbus TCP support (access to digital IO, analog inputs, encoders’ counters, digital counters values, PWM outputs, LCD display, LED matrix display, PoExtBus devices, matrix keyboard status)
  • Support for up to 10 sensors on an I2C bus, up to 10 sensors on 1-wire bus, and up to 7 analog sensors
  • Web interface with newly designed dashboard and I/O status display with multiple user accounts
  • Support for communication with devices on I2C and 1-wire buses
  • Support for Connection signal output
  • Intuitive and user-friendly software
  • Third-party support via communication DLL library and extensive protocol specification document that allows porting to other systems
  • Plugin for Mach3 and Mach4 software, PoKeys57E Ethernet CNC controller as 4-axis external motion controller or general-purpose, highly customizable Human Machine Interface
  • PoBlocks graphical programming PLC software

 

Retirement of personal accounts on Xively

On January 15th, 2018, Xively service retired the personal accounts that many PoKeys users relied on. PoKeys devices can no longer upload data to this web service. Alternative service supported is ThingSpeak

Support for ThingSpeak IoT service

PoLabs implemented the support for ThingSpeak service for all existing PoKeys56 and PoKeys57 series device users. Download the latest PoKeys setup package to install both the software and firmware to support it.

Support for X-Plane flight simulator

See more here: http://forums.x-plane.org/index.php?showtopic=62459

 

Support for PoBlocks graphical programming software

 

Requirements:

  • Ethernet connection between the host computer and PoKeys57E device
  • 5V DC power supply with 400 mA. If any additional peripheral is connected to PoKeys57E, use an appropriately more powerful power supply.
  • Included software requires Windows 2000/XP/Vista/Windows 7/8/10 with .NET framework 3.5 installed (ONLY FOR SYSTEMS WHERE THE DEVICES WILL BE CONFIGURED, TARGET SYSTEM NEEDS NO SOFTWARE INSTALLATION FOR THE DEVICE TO OPERATE AS A STANDARD NETWORK DEVICE)

Software

PoKeys software package contains– PoKeys configuration software
– PoKeys firmware
– PoKeys communication library
– Manual
– PoKeys USB driver (for fast interface)
– PoBlocks graphical programming environment
– Programming examples for C++, C#, VB.NET, Delphi
PoKeys software can be downloaded in the ‘Downloads’ tab.

Compatible with the following Stepper Motor Drivers:

  • Stepper Motor Driver – PoStep25-32
  • Stepper Motor Driver – PoStep60-256

Complete Pre-Build CNC Router Machines

Oryx GT3 CNC Routers Machines

Get your Mach 3 or Mach 4 Software 

Mach 4 Hobby

Mach4 Industrial